Odd hydraulic pressure with manometer ??

Hi
I just fittet a manometer to the filter of my Wedico CAT 996G as pr. manual.

When no movement of valves pressure exeeds the 16Bar??

When moving pressure drops depending on what it's doing:
6 Bar raising arms
8-9 lovering arms
6 bar bucket back
10 bar bucket empty
10 bar tur right
6 bar turn left

Any idea of what is going on?
Reason I got the pressure gauge is because of it acting weird when using it.

After Measurements I changed sinter filter and all oil same problems

I can't see any bent lines or Things connected wrong

Best Regards

Carsten

Hi
I think it's correct mounted as pr manual from wedico??

Somehow I cant attach Picture.

But right side from pump is going to filter and from there to left side og valve blok if you look from the back to the front

Hi
Problem found and fixed.

I bought the loader used, previous owner used a Graupner radio and I changed to Frsky.

Frsky must have servo movement extented beyond 100% (servoweg??) so 125% fixes this problem

Found it when searching Leimbach website:

http://www.leimbach-modellbau.de/FAQ/ look at Fragen zum Thema: Steuerventil then under Meine Hydraulik-Funktionen arbeiten mit der SERVONAUT Fernsteuerung langsamer als vorher, woran kann das liegen ?

Hope this will help others in future

Best Regards

Carsten