Magom Liebherr 574 (Full metall)

A couple of pics of my L574 from Magom. Some details are added and some changed, yet there's more to come!

From the beginning!

And with some paint on...

Made a first prototype of a quick coupler. This prototype is made out of 3d printed resin.

Zitat von Krebsbachhias

Hallin,
...schaut schon richtig gut aus
wie willst du die unteren Verriegelungsbolzen realisieren
Grüße
Wolf

Hi, and thanks! Hope it's OK that I write in English!

I´m not sure how to solve the locking part yet. I've started to try out some solutions with linear electromagnetics. For now, that seems to be way It´s going...but we'll see!

Finally installed some additional rear lights. I split the original rear working light into two lights, so now I have working lights and strobe lights in the same "lighthouse".

Made me some new interior.

The original interior looked like this

The new interior before paint job

After the paint job

I also got some lights to the panel.

Long time since I posted here. I added some rear working lights. The lights are resin-printed.

Also added a rear view camera...