A good friend of mine Jon showed me the picks of this little truck the other day and ever since Rouge built his awesome little single axle day cab pete and Travis little day cab knight hauler I have wanted to build a signal axle day cab truck.
So here is a pick of the bits and bobs..Going to run a R2 tranny with a 65 turn and a 6 tooth onion/ 645 steering servo/ Verkrik low pro tires/ 11 3/4 frame rails/ Glob cab cut way down and other pieces and parts.
Ok here is the built frame with the running geared lowered way down I had to notch the frame in the rear for the axle to travel..
Frame with stock body to the left of the blue tape is where the body gets cut.
Ok time to move the wheel well I think..
And I think this looks right..
I made a little bracket to mount the servo too sideways in the nose of the frame.
Next I got the R2 mount made and installed in the chassis..
And i made a deck plate for the back and got the short wedico fuel tank mounted to the frame also..
Ok pretty much just finishing the cab body work and some details and this one goes to paint and finished..